Home » Blog » Skullcandy Earbuds Pairing: How to Pair Correctly? [Solved]

Skullcandy Earbuds Pairing: How to Pair Correctly? [Solved]

Skullcandy is arguably the best-selling headphone brand in recent few years. They are noise-canceling Earbuds & headphones that are considered unbeatable. If your pair of your Skullcandy wireless earbuds just arrived, then this article will show you how to pair them.

In the new era, wireless headphones have been fully embraced by brands. For example, Skullcandy. Although they take a little bit of work to set up, Skullcandy wireless headphones are worth it. The pairing process can be confusing at first, but Electro Guides is here to help! Keep reading to find your answer.

These are the Skullcandy Earbuds Pairing Methods you must read.

  • Pairing mode should be enabled on your Skullcandy headphones or earbuds.
  • Locate your Skullcandy headphones or earbuds on your device and press the button.

Want to know how to pair your new Skullcandy small wireless earbuds? First, note that this tip will work with many Skullcandy wireless Earbuds and headphones. Don’t wait any longer! Get your Skullcandy earbuds and let’s get started.

Pairing mode should be enabled on your Skullcandy headphones or earbuds.

Skullcandy wireless headphones or earbuds have a simple and easy to use design. One button, the Power OFF/On button, is located on the side of the device and can easily be pressed to turn it off and on.

Skullcandy headphones have a Power button that can either turn on Bluetooth or turn off. Some headphones have a separate button for Bluetooth, but the Power button will activate this function as well.

Press and hold the the button of Power/Bluetooth button for at least 5 seconds to activate your Bluetooth connection. When pairing mode is activated, the LED light will start blinking. The indicator means that you are ready to pair up with your device!

You should know that the Power OFF/On button can also be used to customize modes on Skullcandy Earbuds. Be sure to check your user manual for more information.

Locate your Skullcandy headphones or earbuds on your device and press the button.

After you have finished the activating skullcandy earbuds pairing mode, activate the Bluetooth on your device. To do this, look for an option in your phone’s settings, laptop’s settings, or any other Bluetooth-ON/Enabled device that will allow you to connect to your headset.

You should always remember to set your device to visible in order for the Skullcandy wireless earbud to be able to locate it. Once you see your device in the list of available devices for paired, just tap it to pair the earbud with your phone.


Pairing your Earbuds or headphones with your Android device is a fairly straightforward process. Begin by navigating to the Bluetooth section of your settings menu, then select “Pair New Device”. then see a list of available all devices — if you see your headset listed there, select it. After that, the pairing process with your device is complete!


While Skullcandy wireless Headphones or Earbuds are paired through the Android device’s operating system, there are some minor differences when it comes to pairing with an iPhone. First, go to “Settings” and enable Bluetooth. When the icon on your screen turns blue, search for the model number of your Earbuds or Headphone in the “Other devices” section by pressing “Bluetooth > Other Devices” and selecting it.


For laptops, click on Bluetooth button in the windows toolbar. Then, click “Show Bluetooth devices” and “Bluetooth & other devices”. When you see your Skullcandy Earbuds with a check mark next to it, click on it to start Skullcandy Earbuds pairing.

You can find Bluetooth icon on your taskbar, which is usually located on the bottom of the screen. If you cannot find it, you might need to click on the upward arrow icon. Once you find it, follow these steps a few paragraphs up.

In addition to the steps above, you can also find your Skullcandy wireless earbuds by searching on the Windows search bar. Just type in “Bluetooth and other devices” select the desired Bluetooth device.

Mac OS:

Here’s how to connect your Skullcandy Earbuds to your Mac Laptop: Select the Apple icon in the menu bar and select System Preferences. Click on Bluetooth and find your device. Click Connect and you’re all set.

How to determine whether or not the Skullcandy Earbuds pairing process was successful?

Did you know that there are three ways to tell that your Skullcandy Earbuds have been paired 100% successfully? Maybe they’ll sound a beep, and stop blinking LED light, or maybe they’ll start playing some cool music. The LED light on the headphone will start blinking when you initiate the Bluetooth connection. When you’ve finished pairing your device, the LED light stop blinking.

If you pair your new Skullcandy headphones but do not hear the beep sound or see the LED light, try again. If you still no success after restarting your pairing process, please reset your headset. Replacement of Skullcandy headphones is easy between models, so please read the user manual to get the correct procedure.


If you face issues when trying to connect your Earbuds or your headphones, the following few steps will help solve the problem.

  • If you have Earbuds place your Earbuds in the charging case to keep them charged.
  • Make sure that the model number of your headphone or earbuds is no longer displayed in the list on your mobile device or computer.
  • Turn off the Bluetooth on your device.
  • Remove your right side earbud from the casing and plug it in to turn it on. At this moment, it will not connected to the network at all.
  • Continue by powering down and resetting your headphone. When the light on the Earbud or headphone changes from green to red, you have achieved success. If this is not the case, repeat the step Five(5) until the light becomes red. Place the right earbud back in its carrying case and close the case.
  • Then repeat the procedure with the left side earbud. (4th and 5th steps)
  • As you begin to remove both Earbuds and headphones from their box, the headphones will instantly power on and begin connecting with one another.

You will hear a small beep at the end of the sentence. When this happens, it indicates that the earbuds have formed a bond with one another. When it is ready to “pair,” you will hear a voice prompt telling you that it is ready. That indicates that it is searching for your device.

Finally, re-enable the Bluetooth mode on your device in order to reconnect with the headset.


How do you pair Skullcandy earbuds on Android?

Go to the Settings menu. There, go to Bluetooth. Make sure it is turned on. You will see an option called “Pair new device”. When you see your Skullcandy device listed, tap it and it should pair easily with your phone.

How do you reset Skullcandy earbuds?

  • Turn off your headphones and take them out of your ears.
  • To reset the paired list, hold down the volume + and center or power buttons for up to 5 seconds.
  • Remove the devices and then turn the system back on.
  • It is ready to pair; just select the device you want to use it with and enjoy it. 

Leave a Comment